LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Power Brake Actuation - Brake Booster (Except Hybrid)) >> Removal And Installation >> Brake Booster >> Installation

Brake Booster: Installation

WARNING: This page is about a different variant/trim than selected.

All vehicles 

  1. To install, reverse the removal procedure.
  2. Bleed the brake system. Refer to: Brake System Pressure Bleeding .

    2.7L EcoBoost (238kW/324PS) 

  3. Check the transmission fluid and fill as necessary.

    Material

    : Motorcraft® MERCON® LV Automatic Transmission Fluid / XT-10-QLVC (WSS-M2C938-A) (MERCON® LV,)

scientia non olet · About LEMON Manuals