LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Supplemental Restraint System (3 Of 3) (Except Hybrid)) >> Removal And Installation >> Driver Airbag >> Installation

Driver Airbag: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Connect the electrical connectors.
    GFD485498Courtesy of FORD MOTOR COMPANY
  2. Engage the 2 driver airbag retaining hooks to the steering wheel spring clips.
    GFD485499Courtesy of FORD MOTOR COMPANY
    1. Push down on the driver airbag.
    2. Pivot the driver airbag down and engage the lower retaining hook to the spring clip.
    GFD485500Courtesy of FORD MOTOR COMPANY
  4. If the SRS was depowered, repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .
scientia non olet · About LEMON Manuals