LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (Supplemental Restraint System (3 Of 3) (Except Hybrid)) >> Removal And Installation >> C-Pillar Side Impact Sensor >> Installation

C-Pillar Side Impact Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. NOTE: Make sure the C-pillar and side impact sensor mating surfaces are clean and free of foreign material.

    To install, reverse the removal procedure.

  2. If the SRS was depowered, repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .