LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Front Suspension (Except Hybrid)) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front wheel bearing and wheel hub. Refer to: Front Wheel Bearing and Wheel Hub .
  2. Press the wheel stud from the wheel bearing and wheel hub. Use the General Equipment: Hydraulic Press
    GFD478936Courtesy of FORD MOTOR COMPANY
  3. Inspect the wheel bearing and wheel hub for damage. Replace as necessary.
GFD478937Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals