LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Rear Suspension (Except Hybrid)) >> Removal And Installation >> Wheel Studs >> Removal

Wheel Studs: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the wheel bearing and wheel hub. Refer to: Wheel Bearing and Wheel Hub - FWD . Refer to: Wheel Bearing and Wheel Hub - AWD .
  2. Press the wheel stud from the wheel bearing and wheel hub flange. Use the General Equipment: Hydraulic Press
    GFD478936Courtesy of FORD MOTOR COMPANY
  3. Visual check. Inspect the wheel bearing and wheel hub flange for corrosion or damage. Replace as necessary.
GFD478937Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals