LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine System - General Information (Except Hybrid)) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different variant/trim than selected.

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Check 

NOTE: Refer to the appropriate appropriate service information in ENGINE - 1.5L ECOBOOST (118KW/160PS) - I4 / ENGINE IGNITION - 2.0L ECOBOOST (184KW/250PS) - MI4 / ENGINE - 2.5L DURATEC (125KW/170PS) for the specification.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
GFD479351Courtesy of FORD MOTOR COMPANY