LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Engine System - General Information (Except Hybrid)) >> Diagnosis And Testing >> Engine >> Component Tests >> Engine Oil Leaks

Engine Oil Leaks

WARNING: This page is about a different variant/trim than selected.
NOTE: If an overnight drive is done, the fan air or road air blast can cause erroneous readings.
NOTE: When diagnosing engine oil leaks, the source and location of the leak must be positively identified prior to repair.
NOTE: For vehicles equipped with turbochargers, inspect the turbocharger oil supply tube(s) and the turbocharger coolant tubes sealing ports for leaks. If a leak has been located at the sealing port(s), refer to the appropriate service information in REMOVAL AND INSTALLATION - 1.5L / REMOVAL AND INSTALLATION - 2.0L .

Prior to carrying out this procedure, clean the cylinder block, cylinder heads, valve covers, oil pan and flywheel/flexplate with a suitable solvent to remove all traces of oil.

scientia non olet · About LEMON Manuals