Section 16 (Engine - 2.5L DURATEC (125KW/170PS)): Specifications: Camshaft
WARNING: This page is about a different variant/trim than selected.
| Item | Specification |
|---|---|
| Lobe lift - intake | 9.44 mm (0.371 in) |
| Lobe lift - exhaust | 8.18 mm (0.322 in) |
| Runout (1) | 0.03 mm (0.001 in) |
| Thrust clearance | 0.09-0.24 mm (0.003-0.009 in) |
| Journal diameter | 24.96-24.98 mm (0.982-0.983 in) |
| Journal-to-bore clearance | 0.035-0.080 mm (0.001-0.003 in) |
No. 3 Journal - Supported by No. 1 and No. 5 journals.