LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine - 2.5L DURATEC (125KW/170PS)) >> Removal And Installation >> Oil Pump Screen and Pickup Tube >> Installation

Oil Pump Screen and Pickup Tube: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install a new gasket.
    GFD480691Courtesy of FORD MOTOR COMPANY
  2. Install the oil pump screen and pickup tube and the bolts.

    Torque:

    89 lb.in (10 Nm)

    GFD480689Courtesy of FORD MOTOR COMPANY
  3. Install the oil pan. Refer to: Oil Pan .