LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Front Seats (2 Of 2) (Except Hybrid) >> Diagnosis And Testing >> Front Seats >> Pinpoint Test(s) >> Pinpoint Test V : DTC: U0100:00 >> Notes

Pinpoint Test V : DTC: U0100:00: Notes

Refer to Module Communications Network for schematic and connector information.

Normal Operation and Fault Conditions 

The DSM and the PCM communicate using the HS-CAN1 and MS-CAN.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication with ECM/PCM "A": No Sub Type Information Set by the DSM whenever it has lost communication to the PCM for 5 seconds or longer while DSM input voltage is between 10 and 15.5 volts.

Possible Causes 

scientia non olet · About LEMON Manuals