Driver Power Seat - Without Memory

The seat control switch contains normally closed contacts which are grounded. An individual circuit is switched to voltage when a specific adjustment position is selected. The seat control switch is hard-wired directly to the applicable seat motors. The motor direction is determined by the polarity of voltage supplied from the seat control switch.

The driver power seat is equipped with the following motors:

• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced separately from the seat track assembly)
• Recliner motor (serviced with seat backrest assembly)
• Lumbar motor (serviced with power lumbar assembly)