LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Exterior Lighting (1 Of 2) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Autolamps >> Symptom Chart(s)

Symptom Chart(s)

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Symptom Chart: Autolamps 

Symptom Chart 

Condition Possible Sources Actions
A module does not respond to the scan tool Fuse
Wiring, terminals or connectors
Module
REFER to: Communications Network - 2.0L Duratec - Hybrid (103kW/140PS) (UA) .
The autolamps are inoperative Refer to the Pinpoint Test GO to Pinpoint Test A 
The autolamps are on continuously Refer to the Pinpoint Test GO to Pinpoint Test B