Reversing Lamp: Removal

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

Reversing lamp assembly

1. Remove the push pins.
2. Position aside the liftgate trim panel.
Courtesy of FORD MOTOR COMPANY
Release the tape, trim clips and remove the decklid trim strip.

Courtesy of FORD MOTOR COMPANY
Remove the rear lamp assembly.
1. Disconnect the rear lamp assembly electrical connector.
2. Remove the retainers.
3. Remove the rear lamp assembly.
Courtesy of FORD MOTOR COMPANY

Reversing lamp bulb
1. Remove the push pins.
2. Position aside the liftgate trim panel.
Courtesy of FORD MOTOR COMPANY
Disconnect the reversing lamp electrical connector.

Courtesy of FORD MOTOR COMPANY
Remove the bulb holder and separate the reversing lamp bulb.

Courtesy of FORD MOTOR COMPANY