LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Exterior Lighting (2 Of 2) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Headlamps >> Pinpoint Tests >> Pinpoint Test G : One Or Both High Beams Are On Continuously - Halogen Headlamps >> Notes

Pinpoint Test G : One Or Both High Beams Are On Continuously - Halogen Headlamps: Notes

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Headlamps/Autolamps for schematic and connector information.

Normal Operation and Fault Conditions 

REFER to: Exterior Lighting - Overview .

REFER to: Exterior Lighting - System Operation and Component Description .

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B1D02:15 Left High Beam: Circuit Short To Battery Or Open Sets when the BCM detects an open from the left high beam output circuit.
B1D03:15 Right High Beam: Circuit Short To Battery Or Open Sets when the BCM detects an open from the right high beam output circuit.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks