LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Information Center - Instrumentation, Message Center And Warning Chimes (1 Of 2) (Except Hybrid)) >> Description And Operation >> Instrument Panel Cluster (IPC) - System Operation and Component Description >> System Operation >> Network Message Chart - Gauges

Network Message Chart - Gauges

WARNING: This page is about a different car, the 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
AWD data PCM Input used for the virtual AWD gauge display.
Engine coolant temperature data PCM Input used for the temperature gauge indication.
Engine overheat indication request PCM Input used to send the temperature gauge to full hot.
Engine rpm data PCM Input used for tachometer indication.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Vehicle speed PCM Vehicle speed data used for the virtual AWD gauge display and speedometer indication.
scientia non olet · About LEMON Manuals