LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion SEL >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Information Center - Instrumentation, Message Center And Warning Chimes (2 Of 2) (Except Hybrid)) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Notes

Pinpoint Tests: Notes

WARNING: This page is about a different car, the 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The IPC Is Inoperative/Multiple Gauges, Indicators, RTT Indicators, Warnings And Chimes Are Inoperative Or Always On 

Normal Operation and Fault Conditions 

See IPC component description. REFER to: Instrument Panel Cluster (IPC) - System Operation and Component Description .

The IPC receives a hot at all times voltage from the BCM. The IPC receives the ignition status message for the RUN/START or ACC input from the BCM through the GWM over the HS-CAN3.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Inspect the BCM fuse 13 (7.5A).

scientia non olet · About LEMON Manuals