LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Exterior Lighting (2 Of 2) (Hybrid/ENERGI)) >> Removal And Installation >> Headlamp Control Module (HCM) >> Installation

Headlamp Control Module (HCM): Installation

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary if replacing the component.

    Using a diagnostic scan tool, complete the PMI process for the HCM following the on-screen instructions.

scientia non olet · About LEMON Manuals