LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Exterior Lighting (2 Of 2) (Hybrid/ENERGI)) >> Removal And Installation >> Headlamp Assembly >> Removal

Headlamp Assembly: Removal

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The procedure for the LH headlamp assembly is shown, the RH headlamp assembly is similar.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the front bumper cover. Refer to: Front Bumper Cover .
    1. Remove the bolts.
    2. Remove the bolt.
    3. Disconnect the electrical connector.
    GFD436753Courtesy of FORD MOTOR COMPANY
  3. Remove the headlamp assembly.

    1. Separate the headlamp assembly from the ball stud.
    2. If equipped, separate the wiring harness guides from the headlamp assembly.

GFD436754Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals