LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Exterior Lighting (2 Of 2) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Turn Signal and Hazard Lamps >> DTC Charts >> DTC Chart: SCCM

DTC Chart: SCCM

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

DTC Description Action
B1D36:09 Turn Indicator Switch: Component Failure INSTALL a new LH steering column multifunction switch. REFER to: Steering Column Multifunction Switch LH . CLEAR the Diagnostic Trouble Codes (DTCs). Run the SCCM self-test. If the DTC returns, INSTALL a new SCCM. REFER to: Steering Column Control Module (SCCM) .