LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Exterior Lighting (2 Of 2) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Stoplamps >> Symptom Chart(s) >> Symptom Chart: Stoplamps

Symptom Chart: Stoplamps

WARNING: This page is about a different car, the 2019 Ford SSV Plug-in Hybrid, 2019 Ford Police Responder Hybrid, and 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition Possible Sources Actions
A module does not respond to the scan tool Fuse
Wiring, terminals or connectors
Module		 REFER to: Communications Network - 2.0L Duratec - Hybrid (103kW/140PS) (UA) .
All the stoplamps are inoperative Refer to the Pinpoint Test GO to Pinpoint Test A 
One or more stoplamps are inoperative Refer to the Pinpoint Test GO to Pinpoint Test B 
The stoplamps are on continuously Refer to the Pinpoint Test GO to Pinpoint Test C 
scientia non olet · About LEMON Manuals