LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Power Brake Actuation - Brake Booster (Except Hybrid)) >> Removal And Installation >> Brake Booster >> Installation

Brake Booster: Installation

WARNING: This page is about a different car, the 2019 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. To install, reverse the removal procedure.
  2. Bleed the brake system. Refer to: Brake System Pressure Bleeding .

    2.7L EcoBoost (238kW/324PS) 

  3. Check the transmission fluid and fill as necessary.

    Material: Motorcraft® MERCON® LV Automatic Transmission Fluid / XT-10-QLVC (WSS-M2C938-A) (MERCON® LV,)

scientia non olet · About LEMON Manuals