Non-Dimmable Illumination

The non-dimmable illumination is on when the delayed accessory relay is active. The delayed accessory relay is active:

• When the ignition is on.
• For up to 10 minutes after the ignition is cycled from on to off and a front door is not opened.

The BCM sends the ignition status to the DDM and the PDM over the network. The DDM and the PDM relay that message to their respective RDM. Based on the ignition status, the DDM, the PDM and each RDM provide voltage to the following components

DDM 

• Left front door lock control switch
• Fuel filler door release switch

PDM 

• Door lock control switch
• Window control switch

RDM 

• Window control switch