LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Fusion Energi Titanium >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center And Warning Chimes (2 Of 2) (Hybrid) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes - 2.0L Duratec - Hybrid (103kW/140PS) (UA) >> Pinpoint Tests >> Pinpoint Test BB : The Lane Keeping Aid Warning Chime Is Inoperative >> Pinpoint Test BB : The Lane Keeping Aid Warning Chime Is Inoperative

Pinpoint Test BB : The Lane Keeping Aid Warning Chime Is Inoperative

  1. BB1 CHECK THE SAFETY BELT WARNING CHIME OPERATION

    • Ignition OFF.

    • Ignition ON.

    • Unbuckle the driver safety belt.

    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    Yes  GO to  BB2
    No  Refer to IPC Guided Routine Testing .

  2. BB2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST

    • Using a diagnostic scan tool, perform the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to DTC Chart: IPC .
    No  GO to  BB3

  3. BB3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    Yes  REFER to: Communications Network - 2.0L Duratec - Hybrid (103kW/140PS) (UA) .
    No  GO to  BB4

  4. BB4 CHECK THE LANE DEPARTURE SYSTEM OPERATION

    • Verify the lane departure system operate correctly.

    Does the lane departure system operate correctly? 

    Yes  The system is operating correctly at this time. Inform the customer that this chime only operates with the hands off the steering wheel.
    No  REFER to: Lane Keeping System .
scientia non olet · About LEMON Manuals