Parking Aid Camera Initialization

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

1. Using a scan tool select the controlling module for the parking aid camera(s).

   Courtesy of FORD MOTOR COMPANY

2. Carry out the LIN new module initialization.
3. Follow the on-screen instructions.
4. Check the vehicle for the active guidelines option. Refer to description and operation in the appropriate information.
5. If equipped with active guidelines, drive the vehicle on a flat, smooth road at 32 km/h (20 mph) or more, with hands placed loosely on the steering wheel and minimal steering correction for approximately 30 seconds.
   NOTE: When the battery has been disconnected or discharged the active guidelines may be inoperative until the following step is carried out.