Pinpoint Test I : B1B36:96, B1B38:96, B1B40:96, B1B42:96: Notes
WARNING: This page is about a different car, the 2019 Ford Police Interceptor Utility and 2019 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
B1B36:96, B1B38:96, B1B40:96, B1B42:96
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
PAM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B36:96 | Right Front Outer Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the RHF outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B38:96 | Right Front Inner Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the RHF inner parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B40:96 | Left Front Outer Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the LHF outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B42:96 | Left Front Inner Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the LHF inner parking aid sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Front parking aid sensor
- PAM (integral to the BCM)
NOTE:
Before disconnecting the BCM or any of the parking aid sensors, verify the connectors are properly seated and latched.