Pinpoint Test F : B1B44:96, B1B46:96, B1B48:96, B1B50:96: Notes
WARNING: This page is about a different car, the 2019 Ford Police Interceptor Utility and 2019 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
B1B44:96, B1B46:96, B1B48:96, B1B50:96
Refer to Parking Aid for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
PAM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1B44:96 | Right Rear Outer Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the RHR outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B46:96 | Right Rear Inner Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the RHR inner parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B48:96 | Left Rear Outer Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the LHR outer parking aid sensor has internally failed or has an incorrect attenuation time. |
| B1B50:96 | Left Rear Inner Sensor: Component Internal Failure | A continuous memory and on-demand DTC that sets when the LHR inner parking aid sensor has internally failed or has an incorrect attenuation time. |
Possible Sources
- Rear parking aid sensor
- PAM (integral to the BCM)