Pinpoint Test H : The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed: Notes
The Active Park Assist System Does Not Activate When The Active Park Assist Switch Is Pressed
Refer to Wiring Diagrams Cell 145 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B129E:13 | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Circuit Open | A continuous DTC that sets in the PAM when the PAM detects a stuck open in the active park assist switch input circuit. |
| B129E:9E | Enable/Disable Switch - Semi-automatic Advanced Parallel Park: Stuck On | A continuous DTC that sets in the PAM when the PAM detects a short to ground in the active park assist switch input circuit. |
Possible Causes
- Wiring, terminals or connectors
- Active park assist switch
- PAM