Pinpoint Test L : The 360 Degree View Camera System Does Not Respond When The Camera Selection Switch Is Pressed: Notes
The 360 Degree View Camera System Does Not Respond When The Camera Selection Switch Is Pressed
Refer to Wiring Diagrams Cell 145 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Parking Aid - System Operation and Component Description .
IPMB DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B14A5:11 | Multi-Camera View Switch: Circuit Short To Ground | A continuous and on-demand DTC that sets in the IPMB when the camera selection switch is stuck closed or the circuit is shorted to ground. |
Possible Causes
- Wiring, terminals or connectors concern
- Camera selection switch concern
- IPMB concern
Visual Inspection and Diagnostic Pre-Checks
- Inspect the camera selection switch to verify that the switch is not damaged or stuck in the pressed position.