LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2020 >> Escape Titanium Plug-In Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid - Vehicles With: Active Park Assist >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test(s) >> Pinpoint Test I : There Is An Active Park Assist Fault Message Shown In The CENTERSTACK Infotainment Display And/Or In The IPC (Instrument Panel Cluster) Message Center Display

Pinpoint Test I : There Is An Active Park Assist Fault Message Shown In The CENTERSTACK Infotainment Display And/Or In The IPC (Instrument Panel Cluster) Message Center Display

  1. Refer to Module Communications Network for schematic and connector information.

    Normal Operation and Fault Conditions 

    REFER to: Parking Aid - System Operation and Component Description .

    Possible Sources 

    • Communication network concern
    • PAM
    • PSCM concern
    • SCCM concern
    • ABS concern
    • PCM concern
    • RCM concern
    • TRM concern
    • IPC concern
    • GWM concern
    • APIM concern
    • BCM concern

  2. I1 CARRY OUT A NETWORK TEST

    • Ignition ON.

    • Using a diagnostic scan tool, carry out a network test.

    Do all modules pass the network test? 

    Yes  GO to  I2
    No  REFER to: Communications Network .
  3. I2 CHECK THE PAM (PARKING ASSIST CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the PAM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to Diagnostic Trouble Code (DTC) Chart .
    No  GO to  I3
  4. I3 CHECK THE PSCM (POWER STEERING CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the PSCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Power Steering .
    No  GO to  I4
  5. I4 CHECK THE SCCM (STEERING COLUMN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the SCCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Steering Wheel and Column Electrical Components .
    No  GO to  I5
  6. I5 CHECK THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the ABS module self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Anti-Lock Brake System (ABS) and Stability Control .
    No  GO to  I6
  7. I6 CHECK THE PCM (POWERTRAIN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the PCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Electronic Engine Controls .
    No  GO to  I7
  8. I7 CHECK THE RCM (RESTRAINTS CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the RCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Airbag Supplemental Restraint System (SRS) .
    No  GO to  I8
  9. I8 CHECK THE TRM (TRAILER MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the TRM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Trailer Lamps .
    No  GO to  I9
  10. I9 CHECK THE IPC (INSTRUMENT PANEL CLUSTER) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the IPC self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Instrumentation, Message Center and Warning Chimes - Vehicles With: Head Up Display (HUD) .
    No  GO to  I10
  11. I10 CHECK THE GWM (GATEWAY MODULE A) CONTINUOUS MEMORY DIAGNOSTIC TROUBLE CODES (CMDTCS)

    • Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Communications Network .
    No  GO to  I11
  12. I11 CHECK THE BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Body Control Module (BCM) .
    No  GO to  I12
  13. I12 CHECK THE APIM (SYNC MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, carry out the APIM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Information and Entertainment System .
    No  GO to  I13
  14. I13 CHECK FOR CORRECT PAM (PARKING ASSIST CONTROL MODULE) OPERATION

    • Ignition OFF.

    • Disconnect and inspect all PAM connectors.

    • Repair:

      • corrosion (install new connector or terminals - clean module pins)
      • damaged or bent pins - install new terminals/pins
      • pushed-out pins - install new pins as necessary

    • Reconnect the PAM connectors. Make sure they seat and latch correctly.

    • Operate the system and determine if the concern is still present.

    Is the concern still present? 

    Yes  CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA. If a service article exists for this concern, DISCONTINUE this test and FOLLOW the service article instructions. If no service articles address this concern, INSTALL a new PAM. REFER to: Parking Assist Control Module (PAM) .
    No  The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. ADDRESS the root cause of any connector or pin issues.