Pinpoint Test L : U3000:44, U3000:45, U3000:46, U3000:49
- DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition SODL U3000:44 Control Module: Data Memory Failure Sets when the SODL or SODR detects an internal fault. SODL U3000:45 Control Module: Program Memory Failure Sets when the SODL or SODR detects an internal fault. SODL U3000:46 Control Module: Calibration/Parameter Memory Failure Sets when the SODL or SODR detects an internal fault. SODL U3000:49 Control Module: Internal Electronic Failure Sets when the SODL or SODR detects an internal fault. Possible Sources
- SODL
- SODR
- L1 RETRIEVE IPC (INSTRUMENT PANEL CLUSTER) DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using a diagnostic scan tool, perform the SODL and SODR self-test.
Is U3000:44, U3000:45, U3000:46 or U3000:49 recorded?
Yes INSTALL a new SODL or SODR. REFER to: Side Obstacle Detection Control Module . No The system is operating correctly at this time.