Pinpoint Test R : B1193:00
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition RCM B1193:00 Crash Event Storage Full and Locked: No Sub Type Information This DTC sets due to the vehicle being in a crash. Possible Sources
- RCM
- R1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs).
- Using a diagnostic scan tool, perform the RCM self-test.
Did the DTC return?
Yes INSTALL a new RCM and impact sensors. REFER to: Restraints Control Module (RCM) . No The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.