Pinpoint Test Bn : U3000:49
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BECMB U3000:49 Control Module: Internal Electronic Failure This DTC sets due to an internal fault with the BECMB. Possible Sources
- BECMB
- BN1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs).
- Using a diagnostic scan tool, perform the BECMB self-test.
Did the DTC return?
Yes INSTALL a new BECMB and impact sensors. REFER to: Battery Energy Control Module B (BECMB) . No The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.