Parking Aid Camera Initialization

For information on Ford Color Coded Illustrations refer to OEM Color Coding .

Initialization 

All vehicles 

1. Using a scan tool, carry out a network test to determine if the IPMB function is contained in the BCM or a stand-alone IPMB.

   Vehicles not equipped with a stand-alone image processing module B 

2. Using the path shown carry out a LIN new module initialization.

   Courtesy of FORD MOTOR COMPANY

3. Follow the on-screen instructions.
4. Check the vehicle for the active guidelines option. Refer to description and operation in the appropriate Service Information.
5. NOTE: When the battery has been disconnected or discharged the active guidelines may be inoperative until the following step is carried out.

   If equipped with active guidelines, drive the vehicle on a flat, smooth road at 32 km/h (20 mph) or more, with hands placed loosely on the steering wheel and minimal steering correction for approximately 30 seconds.

   Vehicles equipped with a stand-alone image processing module B 

6. Using the path shown carry out a LIN new module initialization.

   Courtesy of FORD MOTOR COMPANY

7. Follow the on-screen instructions.
8. Check the vehicle for the active guidelines option. Refer to description and operation in the appropriate vehicle Service Information.
9. NOTE: When the battery has been disconnected or discharged the active guidelines may be inoperative until the following step is carried out.

   If equipped with active guidelines, drive the vehicle on a flat, smooth road at 32 km/h (20 mph) or more, with hands placed loosely on the steering wheel and minimal steering correction for approximately 30 seconds.

10. On vehicles equipped with 360 deg. cameras, carry out the 360 degree view camera alignment. Refer to the appropriate vehicle service Information and general procedure.