Pinpoint Test G : C1034:78
WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
REFER to: Parking Brake - System Operation and Component Description .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition ABS C1034:78 Park Brake: Alignment Or Adjustment Incorrect This DTC sets in continuous memory if the park brake component software sends the indication that the actuator position is not valid. Possible Sources
- The EPB Apply and Release routine was not carried out.
- G1 CARRY OUT THE ABS SELF TEST
- Ignition ON.
- Using a diagnostic scan tool, read the ABS DTC.
Is DTC C1034:78 set?
Yes Using the diagnostic scan tool, clear the DTC. No The system is operating correctly at this time.