Network Message Chart - Indicators
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| ABS warning indicator request | ABS module | Input used to control the ABS warning indicator. |
| Airbag warning indicator request | RCM | Input used to control the airbag warning indicator. |
| Brake fluid level low message request | BCM | Input from the BCM for low brake fluid level used to control the brake warning indicator. |
| Brake (red) warning indicator request | ABS module | Input from the ABS used to control the brake warning indicator. |
| Driver seatbelt buckle status | RCM | Input used to control the seatbelt warning indicator. |
| Front fog lamp status | BCM | Input used to control the front fog lamp indicator. |
| High beam status | BCM | Input used to control the high beam indicator. |
| Ignition status | BCM | Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting. |
| MIL request | PCM | Input used to control the MIL. |
| Parking brake (red) indicator request | ABS module | Input from the ABS for the parking brake input used to control the brake warning indicator. |
| Parking brake (yellow) indicator request | ABS module | Input from the ABS used to control the electronic parking brake indicator. |
| Parklamp status | BCM | Input used to control the lights on indicator. |
| Stability-traction control indicator request | ABS module | Input used to control the stability/traction control (sliding car icon) indicator. |
| Stop/start standby indicator | PCM | Input used to control the auto stop/start indicator. |
| Tire pressure warning indicator | BCM | Input used to control the TPMS indicator. |
| Traction control mode | ABS module | Input used to control the stability/traction control disabled (sliding car OFF icon) indicator. |
| Turn indication request | BCM | Input used to control the RH turn, LH turn and hazard indicators. |