LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2019 >> Fusion Titanium, FWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Except Hybrid) >> Removal And Installation >> Wheel Studs >> Installation

Wheel Studs: Installation

  1. Press the wheel stud into the wheel bearing and wheel hub flange until fully seated. Use the General Equipment: Hydraulic Press
    GFD397140Courtesy of FORD MOTOR COMPANY
  2. Install the wheel bearing and wheel hub. Refer to: Wheel Bearing and Wheel Hub - FWD . Refer to: Wheel Bearing and Wheel Hub - AWD .
scientia non olet · About LEMON Manuals