Pinpoint Test Bx : U0557:00: Notes
WARNING: This page is about a different variant/trim than selected.
U0557:00
Normal Operation and Fault Conditions
IPC DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0557:00 | Invalid Data Received From Front Controls Interface Module "A" No Sub Type Information | Sets in continuous memory in the IPC if outside air temperature data is invalid from the FCIM through the GWM is missing for 5 seconds or longer. |
Possible Sources
- Communication concern
- GWM concern
- FCIM
- IPC concern