Pinpoint Test Bi : U0103:00: Notes
WARNING: This page is about a different variant/trim than selected.
U0103:00
Normal Operation and Fault Conditions
IPC DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0103:00 | Lost Communication With Gear Shift Control Module A: No Sub Type Information | Sets in continuous memory in the IPC if gear shift data messages received from the GSM through the GWM are missing for 5 seconds or longer. |
Possible Sources
- Communication concern
- GWM concern
- GSM
- IPC