LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2019 >> Fusion S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 120 (Parking Aid - Vehicles With: Active Park Assist (Hybrid/ENERGI)) >> Removal And Installation >> Rear Active Park Assist Sensors >> Removal

Rear Active Park Assist Sensors: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the rear bumper cover. Refer to: Rear Bumper Cover .
    1. Disconnect the electrical connector.
    2. Release the tabs.
    3. Remove the active park assist sensor.
GFD436457Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals