LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2019 >> Fusion Energi Titanium >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid (Hybrid/ENERGI) >> Removal And Installation >> Active Park Assist Switch >> Removal

Active Park Assist Switch: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this information, refer to Safety Warnings General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  2. Remove the console top trim panel. Refer to: Floor Console .
  3. NOTE: Two tabs on each side.

    1. Release the tabs.
    2. Remove the active park assist switch.

GFD436430Courtesy of FORD MOTOR COMPANY