Network Message Chart

FCDIM (Except 6.5" Touchscreen Display) and FDIM (6.5" Touchscreen Display)

Broadcast Message	Originating Module	Message Purpose
ABS warning indicator request	ABS module	Input used to display the ABS malfunction warning message and message center warning indicator.
Airbag malfunction	RCM	Input used to display the SRS malfunction warning indicator and message center warning indicator.
Alarm malfunction display	BCM	Input used to display the perimeter alarm system malfunction message.
Alarm triggered display request	BCM	Input used to display the perimeter alarm system activated message.
Brake fluid level low indication	IPC	Input used to display the low brake fluid level warning message and message center warning indicator.
Brake warning indicator request	ABS module	Input used to display the brake system malfunction warning message and message center warning indicator.
Compass direction (touchscreen audio)	APIM	Input used to display the compass display.
GPS compass direction (except touchscreen audio)	GPSM	Input used to display the compass display.
Driver door ajar indication	BCM	Input used to display the driver door ajar warning message and message center warning indicator.
Driver rear door indication	BCM	Input used to display the driver rear door ajar warning message and message center warning indicator.
EPAS malfunction	PSCM	Input used to display the service power steering malfunction message and message center indicator.
Engine malfunction indication	PCM	Input used to display the engine malfunction message and message center indicator.
Engine oil change now indicator	PCM	Input used to display the oil change required message.
Engine oil pressure indicator	PCM	Input used to display the low engine oil pressure message and message center indicator.
Factory mode	IPC	NOTE: This message is displayed in the IPC LCD integrated display. Input used to control the factory mode functions in all receiving modules.
Gearshift lever message request	TCM	Input used to display the press brake to unlock gearshift message and message center indicator.
Hill start assist status	ABS module	Input used to display the hill start assist status messages and the message center indicator.
Hood ajar indication	BCM	Input used to display the hood ajar warning message and message center warning indicator.
Ignition status	IPC	Input used to provide the ignition status to all receiving modules.
Key battery message request	BCM	Input used to display the low key battery message.
Lamp outage indication request	BCM	Input used to display a bulb failure message.
Liftgate ajar indication	BCM	Input used to display the liftgate ajar warning message and message center warning indicator.
MyKey® message request	IPC	Input used to display the MyKey® information messages and the message center indicator.
Outside air temperature data	IPC	Input used to provide the outside air temperature display.
Parking brake status	IPC	Input used to display the parking brake applied message.
Passenger door ajar indication	BCM	Input used to display the passenger door ajar warning message and message center warning indicator.
Passenger rear door indication	BCM	Input used to display the passenger rear door ajar warning message and message center warning indicator.
Passive key message request	BCM	Input used to display the passive entry with push button start message displays
Stability-traction control indicator request	ABS module	Input used to display the stability-traction control system malfunction warning message.
TPMS message request	BCM	Inputs used to display the TPMS system status and tire training messages.
Transmission warning indicator request	TCM	Input use to display the transmission malfunction message and message center warning indicator.
Transport mode	IPC	NOTE: This message is displayed in the IPC LCD integrated display. Input used to control the transport mode (shipping) functions in all receiving modules.