Symptom Chart: Warning Chimes
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| All the chimes are inoperative | IPC | GO to Pinpoint Test A |
| The Belt-Minder® feature does not operate | Refer to Pinpoint Test | GO to Pinpoint Test AN |
| The chime sounds when the driver door is ajar (no key in ignition and headlamps off) | Refer to Pinpoint Test | GO to Pinpoint Test AJ |
| The door ajar warning chime is inoperative | Wiring, terminals or connectors BCM IPC |
OPEN the driver door and OBSERVE the door ajar warning indicator. If the door ajar warning indicator does not operate correctly, GO to Pinpoint Test O If the door ajar warning indicator operates correctly, Refer to IPC GUIDED ROUTINE TESTING . |
| The headlamps on warning chime is inoperative | Refer to Pinpoint Test | GO to Pinpoint Test AK |
| The key-in-ignition warning chime is inoperative (without push button start) | Refer to Pinpoint Test | GO to Pinpoint Test AL |
| The parking brake warning chime is inoperative | Refer to Pinpoint Test | GO to Pinpoint Test AM |
| The safety belt warning chime is inoperative | Refer to Pinpoint Test | GO to Pinpoint Test AN |
| The turn signal/hazard on tone is inoperative | Turn signal indicator concern IPC |
VERIFY that the turn signal indicator operates correctly. If the turn signal indicator does not operate correctly, GO to Pinpoint Test R If the turn signal indicator operates correctly, Refer to IPC GUIDED ROUTINE TESTING . |