Stability - Traction Control

The message center provides stability-traction control system messages to indicate the stability-traction control system status or if the stability-traction control system has a fault and requires service.

When the stability-traction control system has been selected off or on, the ABS module sends the stability-traction control on/off message request to the GWM over the HS-CAN2. The GWM sends the stability-traction control on/off message request to the IPC over the HS-CAN3.

When a fault condition exists in the stability-traction control system, the ABS module sets a DTC and sends the stability-traction control chime request to the GWM over the HS-CAN2. The GWM sends the stability-traction control chime request to the IPC over the HS-CAN3.