Turbocharger Oil Supply Tube RH: Installation
- Install the new turbocharger oil supply tube O-ring seals and the new turbocharger oil supply tube oil filter. Lubricate the O-ring seals with clean engine oil. Refer to: Specifications
-
NOTE: Do not use a metal brush, damage to sealing area will result in leaks.NOTE: When installing the turbocharger oil supply tube into the engine block, use care not to damage the new turbocharger oil supply tube oil filter.
- Carefully use a nylon brush to remove the old O-ring residue and use brake cleaner to rinse the O-ring residue out of the turbocharger tube to turbocharger O-ring bore and the turbocharger tube to engine O-ring bore. Inspect the area for deep scratches and gouges. Install new components as needed.
- Install the turbocharger oil supply tube, then install and tighten the turbocharger oil supply tube bolts.
Material: Motorcraft® Metal Brake Parts Cleaner / PM-4-A, PM-4-B
Torque: 89 lb.in (10 Nm)
- Install the right lower charge air cooler intake pipe, then tighten the clamps.
Torque: 44 lb.in (5 Nm)
- Install the upper and lower air cleaner outlet pipe RH. Refer to: Air Cleaner Outlet Pipe RH
- Install the right front wheel and tire. Refer to: Wheel and Tire
- Check and top off the engine oil level as needed. Refer to: Specifications