DTC U05A2 - NOX Sensor B Received Invalid Data From ECM/Pcm
WARNING: This page is about a different variant/trim than selected.
U05A2 - NOX SENSOR B RECEIVED INVALID DATA FROM ECM/PCM
| Description: | This DTC sets when the PCM does not receive the nitrogen oxides bank 1, sensor 2 (NOx12) module message within the defined amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RD . | ||