DTC P262A - Fuel Injector - Pilot Injection Not Learned
WARNING: This page is about a different variant/trim than selected.
P262A - FUEL INJECTOR - PILOT INJECTION NOT LEARNED
| Description: | This DTC sets when the PCM is unable to learn any data for pilot injection correction for 100 seconds while the zero fuel calibration monitor entry conditions are satisfied. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Carry out the power balance test to verify cylinders contribution. Disregard any DTCs set as a result of the power balance test. Single or inconsistent non-contributing power cylinder traces may be caused by a natural variation in a crankshaft speed and should be ignored. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST M . | ||