DTC P242C - Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3
WARNING: This page is about a different variant/trim than selected.
P242C - EXHAUST GAS TEMPERATURE SENSOR CIRCUIT LOW BANK 1 SENSOR 3
| Description: | This DTC sets when the exhaust gas temperature bank 1, sensor 3 (EGT13) voltage is less than 0.10 volt for greater than 15 seconds. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An EGT13_V PID value less than 0.10 volt indicates a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RC . | ||