DTC P221C (Pcm) - REDUCTANT Heater B Current Too Low
WARNING: This page is about a different variant/trim than selected.
P221C (PCM) - REDUCTANT HEATER B CURRENT TOO LOW
| Description: | This DTC sets when the glow plug control module (GPCM) detects insufficient current draw from the reductant pressure line heater. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument cluster message center. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RH . | ||