DTC P2201 - NOX Sensor Circuit Range/Performance (Bank 1 Sensor 1)
WARNING: This page is about a different variant/trim than selected.
P2201 - NOX SENSOR CIRCUIT RANGE/PERFORMANCE (BANK 1 SENSOR 1)
| Description: | This DTC sets when the actual nitrogen oxides bank 1, sensor 1 (NOx11) sensor signal is less than the expected value for a calibrated amount of time. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for all other DTCs. Diagnose all other DTCs first. The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument panel cluster (IPC) message center. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RD . | ||