DTC P2200 - NOX Sensor Circuit (Bank 1 Sensor 1)
WARNING: This page is about a different variant/trim than selected.
P2200 - NOX SENSOR CIRCUIT (BANK 1 SENSOR 1)
| Description: | The nitrogen oxides bank 1, sensor 1 (NOx11) module monitors the NOx11 sensor for circuit concerns. This DTC sets when a concern is detected with one of the circuits used to determine the oxygen (O2) content or the NOx content in the exhaust gas. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The presence of this DTC may indicate that the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle, while carrying out the appropriate drive cycle procedure, until the system warning message has cleared from the instrument cluster message center. Refer to DRIVE CYCLES for additional information. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST RD . | ||